Just replaced old janitrol hpt18-60 thermostat with new programable stat. Everything working okay till earlier - janitrol thermostat hpt18-60
Outdoor unit still works. Within non-operating fan or blower. The accumulation of ice on the external lines.
Wednesday, January 27, 2010
Janitrol Thermostat Hpt18-60 Just Replaced Old Janitrol Hpt18-60 Thermostat With New Programable Stat. Everything Working Okay Till Earlier
Subscribe to:
Post Comments (Atom)
5 comments:
It appears that your drain is blocked, which frozen freon line and you need your furnace fan and clean cages or A-coil.
I do not recommend the cleaning of the coil in your life, depending on how your device ... is quite heavy and difficult to remove. The condensate drain must be easy to do for you, for himself .. . I would as def ... But Adio!
Call your local products, he can pay now or pay later. There are some things you should not try. I know that probably what is new, but if you are already at this point, you need a professional.
OK, if the element with the star then either WIRED OLD NEW incorrect or defective STAT STAT.rEAD New instructions before installing THINGS that manufacturers change every year. But if your not 100% sure that you pay for the use of advanced technology then or you will pay much more by one.
Sounds like condensation contactor closed tight. Thermostat suspect is good.
Fan Switch back to the ON position. Still no? Pull new t-stat off and the bridge red to green. Still no? Bad fan motor, condenser, or forward. If the fan is working if it is "ON" position, then stuck relay or bad t-Stat. When the bridge red to green, then bad-stat
Post a Comment